This post is also available in: Anglais
DK4510
Caractéristiques Principales
- Puissance brute du moteur: 45 HP (33.6 KW)
- Catégorie du PDF: Independent
- Transmission: Manual
- Inverseur: Synchronized
- Open Station (ROPS)
- Rear differential lock
- Push-button hydraulic independent PTO
- Category I three-point hitch
- PTO guard
Projection and Working Lamp
Cliquez pour plus d'informations
With the new projection head and working lamp, the operator will experience safer and easier operation after the sun goes down.
Deluxe Suspension Seat
Cliquez pour plus d'informations
Ergonomically designed, fully adjustable suspension seat allows the operator to ride in comfort no matter what the task may be. A pocket on the back of the seat allows easy access for the operator's manual.
Fender Grip
Cliquez pour plus d'informations
The fender grip, available on both sides, makes it easier get in and out of the tractor.
large capacity hydraulic pump
Cliquez pour plus d'informations
The large capacity hydraulic pump (14.5 gpm) combined with high lift capacity (2,716 lbs) increases productivity.
PTO Cruise
Cliquez pour plus d'informations
With the electronically controlled engine, the PTO rpm can be maintained at the set value even with variable load conditions.
Tail Lamp
Cliquez pour plus d'informations
The stylish tail lights improves operator safety by increasing visibility of the operator.
High Ground Clearance
Cliquez pour plus d'informations
The maximum ground clearance of 15.2 in. makes usage on rocky or uneven terrain simpler.
Center Marker
Cliquez pour plus d'informations
The center marker on the hood assists with maintaining straight rows.
Power and Tilt Steering
Cliquez pour plus d'informations
The standard power steering minimize the effort required to make tight, repetitive turns. The steering wheel tilts with the simple push of lever, allowing easy adjustment to fit the operator needs.
H-Shuttle
Cliquez pour plus d'informations
With the H-Shuttle option you can shift without using a clutch, reducing operator fatigue
Transmission
| Transmission Type | Synchronized |
| Shuttle | |
| Main Gear | |
| No. of Travel Speeds - Forward / Reverse | 8 x 8 |
| Min. Travel Speed of Forward w/ Ag1 @ Engine rated speed | 1.35 mph (2.17 kph) |
| Max. Travel Speed of Forward w/ Ag1 @ Engine rated speed | 17.3 mph (27.9 kph) |
Power Take-Off (PTO)
| PTO Type Trans | Independent |
| PTO Power | 41.6 HP (31 KW) |
| Rear PTO Speeds (1st) | 540 rpm |
Brakes and Clutch
| Brakes | Wet Multi Disc |
| Clutch | Dry Single Plate |
Dimensions w/ AG Tire
| Length w/ 3-point hitch | 124.3 in. (3,157 mm) |
| Width | 62.8 in. (1,596 mm) |
| Height from Top of ROPS Cab | 92 in. (2,338 mm) |
| Wheelbase | 71.3 in. (1,810 mm) |
| Ground Clearance | 15.2 in. (387 mm) |
| Front Tread Ag Tires - Min | 49.4 in (1,254 mm) |
| Rear Tread Ag Tires - Min | 49.3 in (1,251 mm) |
| Turning Radius w/ Brake | 103.5 in (2,630 mm) |
Hydraulics
| Pump | Gear |
| Pump Capacity (Max. Flow Rate) | 14.5 gpm (55.1 lpm) |
3-Point Hitch
| Standard Category | Category I |
| Lift Capacity, 24" aft of hitch, lb (kg) | 2,716 lbs. (1,232 kg) |
| Control Type | Position with Draft Control |
Weight
| Weight with Ag Tires | 3,390 lbs. (1,537.7 kg) |
Équipements et Tableau de Bord
| Équipement de série | Equipement optionnel | Tableu de bord |
|---|---|---|
|
|
|
Pneus
|
Ag |
Front
8-16 Rear 13.6-24 |
|
Turf |
Front
29-12.5-15 Rear 21.5L-16.1 |
|
Ind |
Front
10-16.5 Rear 14.9-24 |
Attachements
Chargeur frontal : KL5520
Fits all DK20, DK10 and DK10SE Series ROPS Models. The KIOTI KL5520 front end loader is specifically designed for the DK10 & DK20 Series and ROPS models of the DK10SE Series. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator. *Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification. |
Excavatrice : KB2485
Prévu pour les tracteurs KIOTI DK40SE, DK45SE, DK50SE, DK55, DS4110, DS4510, NX4510, NX5010, NX5510, NX6010, RX6010 & RX6620. Les caractéristiques peuvent varier selon le modèle de tracteur et sont susceptibles d’être modifiées sans préavis. Les tracteurs doivent être équipés d’un arceau de sécurité et d’une ceinture de sécurité pour la protection de l’opérateur. |
Chargeur frontal : KL5510
Fits DK10 Series Models. (DK4510, DK4510HS, DK5010, DK5010HS, DK5510, DK5510HS) The KIOTI KL5510 front end loader is specifically designed for the DK10 Series tractors, providing efficient performance with single lever joystick control. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator. *Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification. |
Outils
Produits : Outils attelés
Qu'il s'agisse de tondre, faucher, labourer, cultiver, faner, transporter, KIOTI a l'outil performant mais simple à manier qu'il vos faut. |
