Designed with ergonomics and serviceability in mind, KIOTI ZXS Stand-on Mowers manage the needs of your lawn and land with ease. With a Kawasaki FT730V engine combined with a Hydro-Gear® ZT-3400 transmission, the ZXS Series delivers consistent and tireless performance. Owners can choose from a 48″ or 54″ mower deck, each with a fabricated, reinforced 10-gauge steel deck with 7-gauge reinforcement and standard notch blades that make lawncare a breeze . The large 7-gallon fuel capacity helps operators avoid lost time on the jobsite due to refueling.
ZXS Series: Stand-On Commercial Mowers
KIOTI’s ZXS Series.
Specifications and design are subject to change without notification. Not available in California.
| Model | ZXS48 | ZXS54 |
Engine |
||
| Type | Kawasaki FT730V | Kawasaki FT730V |
| Engine Gross hp (kW) | 24.0 (17.9) | 24.0 (17.9) |
| Displacement cu. in. (cc) | 44.3 (726) | 44.3 (726) |
| Choke | Manual Lever | Manual Lever |
| Fuel Tank Capacity gal. (l ) | 7 (27) | 7 (27) |
| Fuel Requirement | Unleaded Gasoline (87 Octane or higher) | Unleaded Gasoline (87 Octane or higher) |
Drive Train |
||
| Model | Hydrogear ZT3400 | Hydrogear ZT3400 |
| Displacement (Pump/Motor) cc | 12/16 | 12/16 |
PTO Type |
||
| Clutch ft.-lb. | 200 | 200 |
Electrical |
||
| Charging System amp | 15 | 15 |
Tire Size |
||
| Front | 13x5-6 | 13x5-6 |
| Rear | 23x10.5-12 | 23x10.5-12 |
Traveling Speeds |
||
| Forward mph (km/h) | 10.5 (17.7) | 10.5 (17.7) |
| Reverse mph (km/h) | 3.5 (5.6) | 3.5 (5.6) |
| Parking Brake | Internal Integrated in Axle | Internal Integrated in Axle |
Dimensions |
||
| Overall Length in. (mm) | 65 (1,650) | 65 (1,650) |
| Overall Width in. (mm) | 60.6 (1,540) | 68.5 (1,740) |
| Overall Height in. (mm) | 51.2 (1,300) | 51.2 (1,300) |
| Wheelbase in. (mm) | 48.5 (1,231.9) | 48.5 (1,231.9) |
| Width (Tire to Tire) in. (mm) | 51.3 (1,303.02) | 51.3 (1,303.02) |
| Approximate Curb Weight lb. (kg) | 992 (450) | 1,014 (460) |
Mower Deck |
||
| Mower Deck Type | Fabricated | Fabricated |
| Lift Mechanism | Hand Lever with Push Button Transport Release | Hand Lever with Push Button Transport Release |
| Deck Steel Thickness | 10-gauge with 7-gauge at edge area | 10-gauge with 7-gauge at edge area |
| Anti-Scalp Ball Rollers | 5 (3 front, 2 rear) | 6 (4 front, 2 rear) |
| Cutting Width of Mower in. (mm) | 48 (1,152) | 54 (1,371.6) |
| Blades | Notched | Notched |
| Cutting Height in. (mm) | 1.5-4.5 (38.1-114.3) | 1.5-4.5 (38.1-114.3) |
| Discharge Chute | Side (Molded Rubber) | Side (Molded Rubber) |
| Deck Height Adjustment | Pin | Pin |
